The best solar trackers add production by keeping panels pointed at the sun instead of waiting for it to arrive, and the six types below split on one question: how many axes move, and what that movement costs you in maintenance. A tracker is the only way to raise output without adding panels. It is also the only part of a ground array with moving parts.
That trade is the whole subject. Fixed racking fails almost never, and a tracker has motors, bearings, controllers and a wind strategy.
Orientation is what a tracker is solving, so the fixed-mount baseline matters first. Our guide to solar panel orientation and output covers what a static array gives up.
The Short Version
Single-axis trackers are the sensible default and the ones that pay back on most ground arrays. Dual-axis adds the smaller remaining gain for considerably more hardware. Passive and manual trackers avoid motors entirely, pole mounts suit small arrays, and tilt-only seasonal adjustment is the cheapest version of the idea.
Key Points
- Trackers raise output per panel rather than per dollar, so compare against buying more panels.
- Single axis captures most of the available gain; dual axis captures the remainder.
- Moving parts mean a maintenance schedule that fixed racking does not have.
- Wind loading is the engineering problem, and stow position is part of the product.
- Ground mounting is almost always required, since roofs cannot carry the loads.
- Shading ruins a tracker’s economics faster than it ruins a fixed array’s.
How We Picked the Best Solar Trackers
We compared tracker types rather than individual products, because models and sizes change while the mechanics behave the same way. Each section covers one type and the site it suits.
We ranked types on four things: how much of the available gain they capture, how many failure points they add, how demanding the installation is, and how they behave in high wind.
We have not stated output gains as figures, because the gain depends on your latitude, your climate and what the array was doing before. A tracker at a cloudy northern site and one in a clear desert are different purchases.
1. Horizontal Single-Axis Trackers, Best Overall
Why It Stands Out
A horizontal single-axis tracker rotates panels east to west through the day on one long torque tube. It captures the large share of the available gain, since the sun’s daily arc matters more than its seasonal height.
This is the configuration used on utility arrays for a reason. One motor can drive a long row, which spreads the mechanical cost across many panels.
Worth Knowing
The torque tube needs real foundations and a level run, so the site preparation is closer to civil work than to bolting down a rack. Rows also need spacing so they do not shade each other at low sun angles.
Maintenance is bearings, the drive and the controller. None of it is difficult and all of it is a schedule you did not previously have.
2. Dual-Axis Trackers, Best for Maximum Output
Why It Stands Out
A dual-axis tracker follows the sun east to west and also adjusts for its seasonal height. That keeps panels close to perpendicular to the light across the whole year rather than across one day.
Where land is limited and every panel has to work hard, the extra axis is the argument. It is also the right choice for small arrays carrying a large load.
Worth Knowing
The second axis adds the smaller remaining gain for a large increase in hardware. Two drives, more linkages and a heavier structure mean more to install and more to service.
Wind is the bigger issue here, because a dual-axis unit presents its face to the weather in more positions. Stow behavior matters more than peak output on an exposed site.
3. Pole-Mount Trackers, Best for Small Arrays
Why It Stands Out
A pole-mount tracker carries a small group of panels on a single post with the drive at the top. For a cabin, a well pump or an outbuilding, it suits the scale of the job.
One foundation, one assembly and no long rows to align makes this the easiest tracker to install without equipment.
Worth Knowing
The pole and its footing carry everything, including wind load, so the concrete is the critical part of the build. Undersizing it is the common mistake.
Panel count per pole is limited, which is fine for a small array and a poor fit for a large one. Several poles cost more per panel than one long row.
4. Passive Trackers, Best for No Electronics
Why It Stands Out
A passive tracker moves without a motor, using a refrigerant that shifts between two canisters as the sun heats them and lets gravity rotate the frame. Nothing electrical is involved.
For a remote site where a controller failure means a trip, removing the electronics removes the thing most likely to fail.
Worth Knowing
Passive units track more slowly and reset overnight, so the morning position lags until the sun warms the canister. Cold weather slows that further.
They also cannot be commanded to stow, which matters on sites that see severe wind. The simplicity costs you control.
5. Manual Adjustable Mounts, Best Cheap Win
Why It Stands Out
A manual adjustable mount is a fixed rack with an adjustable tilt, changed by hand a few times a year. It captures the seasonal part of the gain for a small fraction of a tracker’s cost.
Nothing moves on its own, so there is no drive, no controller and no stow logic. For most owners this is the version of tracking that actually gets installed.
Worth Knowing
It only addresses seasonal height, not the daily arc, so it captures the smaller half of what a tracker offers. It also depends on you remembering to adjust it.
Our roundup of solar panel tilt mounts covers this hardware in detail.
6. Tracker Controllers and Drive Kits, Best for a Custom Build
Why It Stands Out
A controller and linear actuator kit lets you add tracking to racking you already have, or build a frame to suit an odd site. Light sensors or an astronomical clock drive the position.
For anyone fabricating their own mount, this is the part that is not worth making yourself.
Worth Knowing
A kit assumes you are supplying the structure, and the structure is where the engineering sits. Actuator force ratings need to suit the panel area and the wind you expect.
Clock-based control avoids the hunting that light sensors do in broken cloud. Sensor-based control responds better to diffuse conditions.
Solar Trackers at a Glance
| Type | Gain captured | Moving parts | Best for |
|---|---|---|---|
| Horizontal single axis | Most of it | One drive per row | Ground arrays with space |
| Dual axis | All of it | Two drives | Limited land, high value per panel |
| Pole mount | Most of it | One drive | Cabins and small arrays |
| Passive | Part of it | No motor | Remote sites, mild wind |
| Manual adjustable | Seasonal only | None | Owners who want no drive |
| Controller and actuator kit | Depends on build | One or two | Custom frames |
What to Look For in a Tracker
Wind rating and stow position
Ask what wind speed the unit survives and what position it moves to when the wind rises. A tracker that cannot stow flat is a sail.
Foundation requirements
The spec sheet should state footing size and depth. Our guide to securing solar panels in high wind covers why this is not the place to economize.
Panel compatibility
Frames are built for a panel size and weight range. Check the mounting pattern against the modules you intend to use rather than assuming.
Drive and controller serviceability
Find out whether the actuator and controller are replaceable parts you can buy separately. A sealed assembly turns a small failure into a whole-unit problem.
Tracking Against Simply Adding Panels
This is the comparison that decides most purchases, and panels usually win on cost per unit of production. Module prices have fallen a long way and trackers have not.
Tracking wins where land or roof area is the binding constraint rather than money. It also wins where the load profile is peaky in the morning and evening, since that is exactly when a fixed array underperforms.
Shading changes the answer completely. Our guide to how much shade affects solar panels covers why a partly shaded site should fix the shading before buying motors.
Our guide to what direction solar panels should face covers the free version of the same optimization.
Common Mistakes to Avoid
Buying a tracker for a shaded site
Moving a panel into a different patch of shade gains nothing. Clear the obstruction or move the array first.
Undersizing the foundation
Wind load on a moving frame is higher than on a flat rack. The concrete is the part that fails late and expensively.
Ignoring row spacing
Rotating rows shade each other at low sun angles unless they are spaced for it. Our roundup of ground mount solar racking covers layout.
Treating it as fit and forget
Bearings, fasteners and actuators need checking on a schedule. Fixed racking trained people out of that habit.
Related Reading
Best Solar Trackers FAQ
What are the best solar trackers for a home array?
A horizontal single-axis tracker for a ground array with room, or a pole mount for a small array at a cabin or a pump. Both capture the large share of the available gain, and both add one drive rather than two. Dual axis is for sites where land rather than budget is the constraint.
How much extra output does a tracker give?
It depends on your latitude, your climate and the array’s existing orientation, which is why no single figure is useful. A clear-sky site gains far more than a persistently cloudy one, because tracking only helps when there is direct sun to follow.
Is single axis or dual axis better?
Single axis for almost everyone. It captures most of what tracking offers with one drive, and dual axis adds the remaining portion for a large increase in hardware, cost and servicing.
Can I put a tracker on a roof?
Generally no. Trackers impose moving loads and wind loads that residential roof structures are not designed for, which is why these are ground or pole mounted.
What maintenance does a tracker need?
Bearing and fastener checks, actuator inspection, and confirming the controller still tracks and still stows. The list is short, and the point is that fixed racking has no list at all.
What happens in high wind?
A powered tracker moves to a stow position, usually flat or steeply tilted, to reduce the load. Ask about the stow wind speed and whether stow works if power is lost, because that is the failure case that matters.
Are passive trackers worth considering?
On a remote mild-wind site, yes, because removing the motor and controller removes the most likely failure. They track more slowly, lag in the morning, and cannot be told to stow.
Should I buy a tracker or more panels?
More panels, unless space is your limit. Module cost per unit of production is low enough that adding capacity usually beats adding mechanism, and the extra panels have no maintenance schedule.